All About The Flooring Daily

Concrete Staining: Types, Procedure, and Advantages

Aug 17

Staining is an easy and cost-effective way to improve the appearance of concrete surfaces. The water-based solution is poured onto a washed concrete surface. Then, it becomes a permanent part of the concrete surface. This creates this sort of flooring.


Concrete Staining

Sealers are employed to protect staining materials from wear or fade. Concrete is extremely absorbent, and staining can be done in any color you imagine. Many different chemicals and processes are available to concrete staining Albuquerque in various colors and shades.


What are the various types of concrete stains?


Concrete staining can be divided into two types.


Concrete can be stained using an acidic chemical.

Reactive concrete staining is typically made from inorganic metallic salts or hydrochloric acids. They react with concrete minerals. The chemical reaction takes place, and the stain forms a permanent bond with the concrete, leaving a mark on it to make it look like marble.


Reactive and acid stains offer fewer color options than non-reactive or water-based stain types. They also require more security precautions.


Concrete staining that isn't reactive

In non-reactive stains, water-based acrylic polymers, and pigments, chemical reactions aren't needed to produce color. It penetrates concrete further and deposits color particles into the pores.


A sealant is applied to the area to prevent stains from peeling, flaking, and fading.


Polymer-bonded technology used in water-based stains is one example. It reduces the risk of the stain peeling, fading, or flaking while being eco-friendly.


As a result, water-based staining is often used because of the wide range of shades and tones it can provide, ranging from the palest and transparent hues to the most vibrant and striking solids.


Mixing non-reactive colors to create new colors has no adverse results because they do not react with concrete. Non-reactive stains, on the other hand, do not contain acids or solvents, making them simpler to apply.


Concrete staining Albuquerque, reactive and non-reactive, is a wonderful way to bring new life to surfaces that are worn out, like countertops or concrete slabs. It can also create patios, garage floors, indoor concrete floors, and fireplace walls.


The Staining Process for Concrete


Concrete staining Albuquerque is a simple but time-consuming process that can take up to two days to complete. The following steps are required for concrete straining:


Concrete Surface Preparation

  • It isn't important how old the concrete is; meticulous surface preparation is vital.

  • Concrete cleaning products and grinding solutions completely cleanse concrete surfaces, removing debris, residues, and dirt.

  • The coating or stain that has been applied on concrete has to be removed before staining.

  • Crack sealants for concrete can be employed if there are any.

  • To clean up any scratches, a floor cleaner could be employed.


Staining Procedures


  • Tape a piece over surfaces that are exposed to prevent stains from settling.

  • The stain is then gently diluted with water to get the desired color.

  • The surface is coated with an airless sprayer or brush.

  • Depending on the temperatures, humidity, and airflow, the freshly applied stain may require up to 10 hours to dry completely.

  • For a deeper shade, do the same as before.


Clean up the Spillage

  • Clean the concrete thoroughly using fresh water to remove any remaining residue.

  • T.S.P. or baking soda can neutralize acid stains.

  • Using a brush, the final rinse will remove any residue.

  • Putting on the Sealant

  • Stain-resistant concrete can be maintained through the use of concrete sealers.

  • The concrete should be allowed to cure for at least one day following the sealants having been applied.

  • It is advised to apply two coats of the sealer for the longest-lasting results.


Concrete Contractors Albuquerque

5416 La Colonia Dr NW, Albuquerque, NM 87120